URAWA UPower UP200 (UP203C + UG12) Nail Drill – 20,000 RPM

Product detailed description

Professional URAWA UP200 nail drill

URAWA UPower UP200 is a professional tabletop nail drill system designed for everyday use in nail studios and beauty salons. The complete system combines the UP203C control unit with the UG12 motor handpiece.

The UG12 reaches up to 20,000 RPM. Manual speed control allows the technician to adjust performance according to the e-file bit and the specific task.

Variable speed up to 20,000 RPM

Speed is adjusted from the front panel of the UP203C control unit. Start at MIN and increase gradually to the appropriate speed for delicate refinement, polishing or material reduction.

Forward / Reverse rotation

The UP203C provides Forward and Reverse rotation, supporting comfortable work from different angles and for both right- and left-handed techniques. Change direction only after the motor handpiece has fully stopped.

URAWA UG12 motor handpiece

The included UG12 handpiece uses a durable metal body and closed bearing design for stable, smooth operation. It weighs approximately 160 g without cable.

3-pin handpiece connection

The UG12 supplied with this system uses a 3-pin connector for connection to the UP203C control unit. When purchasing a replacement handpiece, verify the connector type carefully.

Quick e-file bit change

The UG12 uses a rotating locking ring: position R releases the bit and position S secures it. It is intended for professional e-file bits with a 2.34 mm shank.

The handpiece must be completely stopped before opening the locking mechanism or changing the bit.

Overload protection

The UP203C includes an overload protection system. It may interrupt power if the handpiece is excessively loaded, the motor/bit becomes blocked or the locking ring is operated incorrectly while running.

If the yellow OVERLOAD indicator activates, reduce the speed control to minimum, switch the device off and allow the protection indicator to reset before restarting gradually.

Suitable professional applications

• gel and acrylic enhancement refinement
• removal of old artificial nail material
• shortening and shaping enhancements
• surface levelling and smoothing
• refining the underside of sculpted nails
• C-curve and free-edge correction
• polishing with appropriate attachments
• detail nail-art work
• drilling nail-piercing holes with suitable attachments
• selected pedicure tasks with appropriate bits

Technical specifications – UP203C control unit

• model: UP203C
• input voltage: AC 230 V
• frequency: 50 Hz
• power consumption: 23 VA
• output: DC 3–20 V / 0.5 A
• dimensions: 130 × 132 × 87 mm
• weight: 1.4 kg
• variable speed control: yes
• Forward / Reverse: yes
• overload protection: yes
• overload indicator: yes
• handpiece connection: 3-pin

Technical specifications – UG12 handpiece

• model: UG12
• maximum speed: 20,000 RPM
• rated voltage: DC 20 V
• dimensions: Ø 23 mm × 130 mm
• weight: 160 g without cable
• bit shank diameter: 2.34 mm
• connector: 3-pin
• locking system: rotating locking ring
• body material: stainless steel
• bearing: closed

Recommended operating conditions

• ambient temperature: 0–40 °C
• relative humidity: 20–80 %, non-condensing
• use only in dry indoor environments

Package contents

• 1× URAWA UP203C control unit
• 1× URAWA UG12 motor handpiece with 3-pin connection

Important: Use the correct e-file bit for each task and an appropriate speed. Never operate the locking ring or change rotation direction while the handpiece is running.